|
|
|
|
|
| |
|
| |
| |
 |
|
| |
| |
|
|
|
| |
- Two Channels: Enable the unit to support up to two testing instruments with independent or tandem configurations.
- Built-in Alarm System: For power, speed, torque, temperature, air flow, water flow, electrical overload and external inputs
- Torque/Speed Analog Outputs: For interface with a data acquisition system or strip chart recorder
- Two Standard Computer Interfaces: RS-232 and IEEE-488
- High Speed Data Acquisition: 120 torque and speed points per second via IEEE bus
- (approx. 60/sec. via RS-232)
- High Quality, Easy-to-Read Vacuum Fluorescent Readout: Displays torque, speed, power, auxiliary and PID (proportional gain, integral and derivative) values
- Fast Full-Curve Data Acquisition: Free-run to locked rotor in seconds
- Speed & Torque Operating Modes: Provide independent PID settings for improved Dynamometer control
- Built-in Current-Regulated Supply: For use with Hysteresis Dynamometer only
- Adjustable Torque Units: English, Metric and SI are standard
- Dynamometer Overload Protection ---
- Digital Filter: Removes undesired noise from torque signals
- Cross Loop Function: Allows closed loop control of brake via torque transducer
- Programmable Digital PID Values: Controlled and stored via M-TEST software or controlled manually
- Saving: Saves programmed values within configuration
- Auxiliary ± 10 VDC Analog Input: For additional transducer
- Single or Multi-point Torque and Speed Stabilized Testing: Via M-TEST software
- Calibration: Closed box calibration
- Rack Mounting: 19 in (482.6 mm) rack mounts with handles
|
|
| |
| |
|
|
| |
| |
Magtrol’s Model DSP6001 High-Speed Programmable Dynamometer Controller employs state-of-the-art Digital Signal Processing Technology to provide superior motor testing capabilities. Designed for use with any Magtrol Hysteresis, Eddy-Current or Powder Dynamometer, Magtrol In-Line Torque Transducer or auxiliary instrumentation, the DSP6001 can provide complete PC control via IEEE-488 or RS-232 interface. With 120 readings per second, the DSP6001 is ideally suited for both the test lab and the production line. |
|
| |
| |
|
|
| |
| |
 General Specifications |
|
|
|
|
 |
 |
| |
|
|
- Motor Testing
- Load-Force -Weight Systems
- Torque Transducers
|
- Displacement Transdiucers
- Rotary Transmitters
- Resitance Measurement
|
| |
|
| |
|
|
|
|
.jpg){kind=small}
