|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- True process temperature monitor
- Thermocouple & RTD input
- High accuracy of 0.2% fs
- Standard output available per mV per count
- Optional customer specified output available
- 0.1 & 1.0 degree resolution
- 3-3/4 digits of maximum 3999 counts
- Switchable C/F range
|
|
|
|
|
|
|
|
 |
The MT series are designed for Thermocouple inputs: J,K,E,T,N,R,S and B &MTR series for RTD,
input of PT100 ohms, a1. Modular type input: modules for all TC types, with range selection from 0.1 or 1 degree resolution
for ( J & K ).
2. Switchable display & output for degree Centigrade or Fahrenheit.
3. Standard analog output – mv per count. Optional customer specified output. |
|
|
|
|
|
|
|
|
|
Range: |
Accuracy (23 + 3°C): |
0.2% fs + 0.6″C-MT Series0.2% fs + 0.3″C-MTR Series |
Stability : |
MT SeriesTemperature coefficient < 70 ppm+0.3uV / “CLong term draft < 0.15 per year
MTR
Temperature coefficient < 70ppm / “C
Long term draft < 0.15 per year |
Digits & counts: |
3-3/4 digits maximum 3999 counts |
Display : |
0.56” super rate LED |
Wire Resistance affect : |
< 4 uV per 100Ω |
Response time : |
Sample rate 2 times / sec typically |
Input Resistance: |
> 20 MΩ MT Series Only |
Noise Rejection : |
Cmrr > 100 db (50 / 60 Hz), Nmrr > 80 db |
input Overload: |
Maximum 250V rms 30 sec |
Dielectric strength: |
2 KV rms / 1 minute for 50 or 60 Hz |
Output: |
Standard per mv per display count, option of customer specified |
Operating conditions: |
Temperature range -10 to 55″C, humidity 0-99% RH non-condensed, storage -25 to 70″C |
Auxilliary Power: |
AC / DC version < 3.5VA, DC option version !20% < 5 watts |
Applied rules and standards |
Measuring & conversion: |
IEC 688 |
Dielectric strength: |
IEC 688 |
Impulse & Surge test: |
ANSI C37.90.1/1989IEC 255-3 (1989) |
Measuring reliability: |
VDE 3540 |
|
|
|
|
|
|
|
General Specifications |
|
|