| |
|
|
|
|
| |
|
| |
| |
|
|
|
| |
- Full Line of edgewise meters
- Available in:
- Mechanism
- Moving coil - DC Applications
- Suspension
- Taut-band - frictionless- ideal if subjected to shock
- Pivot and Jewel- Rugged - ideal if subjected to vibration
- Pfn- Available in 48x24, 72x36, 96x48 and 144x72mm
- Pffn- Available in 48x18.5, 72x18.5, 72x24 and 96x24mm
- Overload of 120% of rated capacity, continuous
- Accuracy: DC ±1.5% of full scale
- Tracking: ± 2% DC
- Overshoot: ©˜5% of scale length
- IP54 or Tropicalized meters available
- Wide Range of inputs - to customer's specifications
|
| |
|
|
| |
| |
|
|
|
| |
|
|
These high quality meters comply with DIN EN60051 (IEC51) requirements , with a standard accuracy of ±1.5% of full scale or better.
Gossen meters are designed for applications that require reliable, rugged instruments with high resolution readings. They are manufactured from self-extinguishing, polycarbonate housing or sheet metal housing . Scales are easily interchangeable for maximum scaling flexibility, along with Gossen's patent mechanical movements, making these meters ideal for any application.
The optimum scale display area allows for the use of large, easy to read numerals and divisions. Gossen also offers outstanding meter performance, providing exceptional accuracy, tracking and repeatability.
|
|
|
| |
| |
|
|
| |
|
| |
|
| Meter Types |
| Edgewise |
DCA, DCV, ACA, ACV and Hz |
| Edgewise Relay Meters |
DCA, DCV, ACA, ACV and Hz |
| Display |
| Scaling: |
Customized to any scaling desired, from linear to specialized Cos Ø, square root distributions, with color applications for visual emphasis and to any desired engineering units. |
| Specific accuracies |
| Basic Accuracy: |
±1.5% of full scale basic accuracy class. |
| Rectifier Type Meters: |
±2% of full scale basic accuracy class. |
| Expanded Scale Voltmeters: |
0.5% of full scale |
| Frequency Meters: |
± .15Hz @45-55Hz and 55-65Hz, ±0.093Hz @
58-62Hz, ±1.5Hz @350-450Hz |
| Zero Suppressed Meters: |
Errors at 20% suppression = ±2%
of end-scale |
| Higher Accuracy: |
1% or better of Full scale or better |
| |
| Position of use: |
Vertical (position) standard
or to specified angle and/or position |
| Full scale deflection: |
90 ° |
| Movements: |
Taut Band |
| The absence of friction
resulting from this permits greater sensitivities
and provides more rugged meters.Common
failures of conventional meters subjected to
shock testing are cracked jewels and/or
blunted pivots. |
| Pivot and Jewel |
| In this design the coil and pointer are
supported by polished steel pivots at each
end which fit into jewel bearings. Pivot and
jewel meters are recommended for high vibration
environments because of the
mechanism’s inherent stability and strength.
Accuracy and repeatability are almost equal
to the taut-band’s, and good performance
from the pivot and jewel construction is the
reason for its long popularity. |
| Case: |
Polycarbonate Plastic - metal casing available for special applications that require extra shielding |
| Cover: |
Glass window with black polycarbonate bezel |
| Damping: |
Eddy current |
| Overload: |
| Continuous |
120% of rated value |
Short-Term:
Current Measurement |
Moving Coil
10 x rated value, 5 s
With rectifier:
2 x rated value, 0.5 s |
Short-Term:
Voltage Measurement |
Moving Coil
2 x rated value, 5 s
With rectifier:
2 x rated value, 0.5 s |
| |
| Overshoot: |
≤5% of scale length |
| Response time: |
≤2 s per DIN EN 60061-1
|
| Power Consumption: |
Ammeters: 0.4 ... 0.6 VA
Voltmeters: approx. 4.0 VA |
| General: |
| Operating Temp.: |
-25°C to 65°C (-4 to 149°F)
Tropicalized or IP54 sealed units available |
| Storage Temp: |
-10 to 55°C (14 to 50°F) |
| Relative Humidity: |
95% (non condensing) |
|
|
| |
| |
|
|
|
|
| |
| |
 General Specifcations |
|
|
|
|
|
 |
|
|
|
|
.jpg){kind=small}
