Spacer Home Contact_us ob Opportunities ISO_Registration Privacy_Statement
 
Temperature Transmitter

Conax

HTP transmitter Series
2-Wire Temperature Transmitter for RTDs

  
previous URL Next URL
< Links >
 
 
 
  Conax HTP transmitter Series 2-Wire Temperature Transmitter for RTDs  
 
  Characteristics:  
 
  • Output: SPAN 4-20mA, limiting @ <28mA
  • Input: RTD - 100Ω, 2 or 3 wire connection
  • Input Span: SRTD: 20ºC min., 500ºC max.
  • Burnout Detection: Upscale, Standard
  • Supply Voltage: 8-38 VDC polarity protected
  • Maximum Load: Rmax = (V supply - 8V)÷ 20 mA
  • Ambient Temp.: -20ºC to +70ºC
  • Humidity: 0-95% RH, non-condensing
  • Linearity: RTD: Better than ± .05% of SPAN referred to sensor temperature
  • Stability: (for both ZERO and SPAN) RTD (100ºC SPAN): .03% of SPAN/ºC
  • Accuracy: 0.1% of SPAN typical
 
 
  Product Description:  
 
  The Conax Model HPT is a low cost, 2-wire, non-isolated temperature transmitter for RTD sensors, and is designed to fit in our popular T11 model terminal head.
The HPT housing has a removable base allowing access to the electronics for the purpose of temperature range changes, which are easily accomplished with plug-in resistors		  
 
  Downloads:  
 
  pdf_pic Downloads:General Specifications  
base
 
© 2006-2008 Electro-Meters.com
Test and Measurement Instruments | Portable Instruments | Panel Meter distributors
Head office located at: 900 McKay Rd., Pickering, Ontario L1W 3X8 (click for map)
Sales: 905.428.3413 | Toll-Free: 800.617.3413 | Fax: 905.428.6086 | E-Mail: sales@electro-meters.com

All descriptions and specifications are subject to change without notice
Privacy Notice | Conditions of Use.
Xhtml validated
 
Scroll down
 
scroll
 
  scroll up  
 
index web mail