Conax

(TG) Series

Transducer Sealing Glands
(TG) Series Transducer Sealing Glands
Characteristics:
  • Stainless Steel Fitting
  • For Bearing Oil Sealing
  • Easy Installation – No “Potting”
  • Seals 2 to 14 Wires
  • Pressure*: to 50 PSI (3.4 bar)
  • Temperature Range: Ambient to 100°F (37.8°C)
  • Field Adjustable
  • Reusable Fitting
Product Description:
space
For bare wire sealing against gas or liquid, our TG Glands can be used for various solid bare wire transducers such as thermocouples, strain gauges, thermistors and resistance element leads. May also be used to seal bare solid conductors entering a pressure vessel supplying high current at low voltage to equipment within the vessel. Continuous Wire Feedthrough for Embedded Bearing Temperature Sensors, Transmitters and Sealing Assemblieswhile sealing securely to prevent oil wicking along the leads.Conax Buffalo BEARING SENSOR WIRE SEAL efficiently seals directly on the individual Teflon® insulated leads of an embedded bearing temperature sensor exiting an oil-filled bearing housing.Typical applications include the sealing of these leads on large motors, generators, turbines, pumps, compressors and journal bearing pedestals.
space
Specifications Table:
space
Catalog Num. Wire Gauge # of wires Thread NPT Length
Hex Size
TORQUE** (Ft-Lbs except as noted)
A B Neop. Viton Teflon Lava
MTG-24-*2 24 2 1/8″ 1-3/8″ 1-3/4″ 9/16″ 20-25 20-25 20-25 30-35
TG-24-*2 24 2 1/4″ 2″ 2-5/8″ 3/4″ 25-30 25-30 30-35 40-45
MTG-24-*4 24 4 1/8″ 1-3/8″ 1-3/4″ 9/16″ 20-25 20-25 20-25 30-35
TG-24-*4 24 4 1/4″ 2″ 2-5/8″ 3/4″ 25-30 25-30 30-35 40-45
MTG-20-*2 20 2 1/8″ 1-3/8″ 1-3/4″ 9/16″ 20-25 20-25 20-25 30-35
TG-20-*2 20 2 1/4″ 2″ 2-5/8″ 3/4″ 25-30 25-30 30-35 40-45
MTG-20-*4 20 4 1/8″ 1-3/8″ 1-3/4″ 9/16″ 20-25 20-25 20-25 30-35
TG-20-*4 20 4 1/4″ 2″ 2-5/8″ 3/4″ 25-30 25-30 30-35 40-45
TG-20-*6 20 6 1/2″ 2-5/8″ 3-3/8″ 1″ 45-50 45-50 50-55 125-140
TG-20-*8 20 8 1/2″ 2-5/8″ 3-3/8″ 1″ 45-50 45-50 50-55 125-140
TG-20-*16 20 16 3/4″ 2-7/8″ 3-5/8″ 1-1/4 75-85 75-85 75-85 200-220
TG-18-*6 18 6 1/2″ 2-5/8″ 3-3/8″ 1″ 45-50 45-50 50-55 125-140
TG-18-*8 18 8 1/2″ 2-5/8″ 3-3/8″ 1″ 45-50 45-50 50-55 125-140
MTG-14-*1 14 1 1/8″ 1-3/8″ 1-3/4″ 9/16″ 20-25 20-25 20-25 30-35
TG-14-*1 14 1 1/4″ 2″ 2-5/8″ 3/4″ 25-30 25-30 30-35 40-45
TG-14-*2 14 2 1/2″ 2-5/8″ 3-3/8″ 1″ 45-50 45-50 50-55 125-140
TG-14-*3 14 3 1/2″ 2-5/8″ 3-3/8″ 1″ 45-50 45-50 50-55 125-140
TG-14-*4 14 4 1/2″ 2-5/8″ 3-3/8″ 1″ 45-50 45-50 50-55 125-140
TG-14-*6 14 6 3/4″ 2-7/8″ 3-5/8″ 1-1/4 75-85 75-85 75-85 200-220
TG-14-*8 14 8 3/4″ 2-7/8″ 3-5/8″ 1-1/4 75-85 75-85 75-85 200-220
TG-8-*2 8 2 3/4″ 2-7/8″ 3-5/8″ 1-1/4 75-85 75-85 75-85 200-220
Grey Arrow Grey Arrow
Length A Length B
Type A has mounting thread only Type B has cap end threaded
space
Downloads:pdf_pic Downloads:General Specifications
  index web mail