Electro-Meters:Conax RTDs

Terminal Head Assembly - Assemblies with Head & Direct Mount
Conax Buffalo provides high temperature assemblies with T5, T8, T11 and T12 termination heads in aluminum, stainless steel or cast iron to meet application needs. T5 termination heads meet NEMA 4 requirements providing protection against windblown dust and rain, splashing water, hose-directed water and external ice formation. (See page 11 for details on termination heads.) The sheath is affixed to the terminal head using a Conax Buffalo packing gland Type PG4 with lava sealant. Terminal heads with terminal blocks and gasket seal are rated to 275° F (135° C).
Plug & Jack Assembly - (PJFC-Plug) Termination & Support Tube
An adjustable support tube offers flexibility for immersion adjustment while protecting the sheath from potential damage during installation. The rigid, thick wall offers additional support when penetrating the vessel/furnace wall. Standard polarized plug and jack termination for use with all calibration types. Plug and jack assemblies are made from molded glass filled thermoset compounds and are designed to operate in temperatures to 300° F (150° C). Polarity identification marks are molded in the bodies for installation assistance.
T3/T4 Assembly - Leadwire Termination and Support Tube
This exclusive Conax Buffalo design provides a practically unbreakable connection between the leadwire and probe lead. The T3 epoxy-filled transition is supplied with Teflon-insulated extension wire as standard; silicone-impregnated fiberglass insulation is also available. Standard extension end leads are 24" long (longer leads available on request). When the progressive description specifies 24 gauge probe wire, 20 gauge extension wire is standard. When the progressive description specifies 30 gauge probe wire, 24 gauge extension wire is standard. T4 termination provides a stainless steel overbraid for maximum flexibility and abrasion resistance. Available in all sheath materials and wire types. Both termination types function to 300° F (150° C) continuous temperature.

Conax

Resistance Temperature Detectors With Termination Assemblies

Resistance Temperature Detectors
With Termination Assemblies