|
Other size NPT, MS 33656 Style E mounting thread, bore sizes and sealing gland materials of construction are available. Consult factory.
Pressure rating guide values are for glands with elements restrained by the compressed sealant. Higher pressures may be attained by additional element restraints. Consult factory.
All pressure and torque ratings determined at 68°F.
*Specify Type
A or B. |
.jpg) |
|
|
|
| |
|
| |
| |
 |
|
| |
| |
|
|
|
| |
- Stainless Steel Fitting
- For Gas or Liquid
- Easy Installation -No Potting
- Seals 1 to 12 Wires
- Pressure: Vacuum to 10,000 PSI (690 bar)
- Temperature Range From -300°F to +450°F
- (-240°C to +232°C)
- Rated: 600 Volts to 55 Amps
- Field Adjustable
- Reusable Fitting
- Wire Identification Markers Applied
- Wires Readily Assembled or Replaced in Field
- Available With or Without Conductors
- Available With Thermocouple Material Conductors - Selected Sizes
Special Notes:
- Solderless terminals can be furnished on all wire ends if specified - at additional cost. Consult factory.
- Bulk wire is available from Conax Buffalo for field assembly of Power Lead Glands.
- Standard wire supplied by Conax Buffalo is solid copper conductor with Kapton insulation.
- Materials other than Kapton wire and Teflon or Grafoil sealant are available for special applications. Contact your Conax Buffalo sales engineer.
- Normal wire length supplied is 24 total, with PL Gland assembled approximately at the mid-point. Specify any variation on order.
- PL Glands may be purchased without wires - ready for field assembly.
|
|
| |
| |
|
|
| |
| |
Insulated power lead sealing glands provide versatility for sealing against gas or liquid in feedthroughs in autoclaves, sterilizers and motor power applications. Ideal for conduit box feedthroughs, pressure and vacuum chamber power and instrument feedthroughs, and more. |
|
| |
| |
|
|
|
| |
| |
Catalog Number
PL- |
Wire Gau. |
wrs |
A / Wr |
Thrd NPT |
Length |
Hex. |
TORQUE (Ft-Lbs) |
Pressure (PSI) |
| A |
B |
Grafoil |
Teflon |
Grafoil |
Teflon |
| 18-*1 |
18 |
1 |
13 |
1/8 |
1-15/32 |
1-27/32 |
9/16 |
20-30 |
12-15 |
10,000 |
1,600 |
| 18-*2 |
18 |
2 |
13 |
1/2 |
2-5/8 |
3-3/8 |
1 |
90-100 |
60-70 |
10,000 |
4,000 |
| 18-*3 |
18 |
3 |
13 |
1/2 |
2-5/8 |
3-3/8 |
1 |
90-100 |
60-70 |
10,000 |
4,000 |
| 18-*4 |
18 |
4 |
13 |
1/2 |
2-5/8 |
3-3/8 |
1 |
90-100 |
60-70 |
10,000 |
4,000 |
| 18-*6 |
18 |
6 |
13 |
3/4 |
2-7/8 |
3-5/8 |
1-1/4 |
150-165 |
90-100 |
10,000 |
2,700 |
| 18-*8 |
18 |
8 |
13 |
3/4 |
2-7/8 |
3-5/8 |
1-1/4 |
150-165 |
90-100 |
10,000 |
2,700 |
| 18-*10 |
18 |
10 |
13 |
3/4 |
2-7/8 |
3-5/8 |
1-1/2 |
250-265 |
125-140 |
10,000 |
2,100 |
| 18-*12 |
18 |
12 |
13 |
3/4 |
2-7/8 |
3-5/8 |
1-1/2 |
250-265 |
125-140 |
10,000 |
2,100 |
| 16-*2 |
16 |
2 |
17 |
1/2 |
2-5/8 |
3-3/8 |
1 |
90-100 |
60-70 |
10,000 |
3,000 |
| 16-*3 |
16 |
3 |
17 |
1/2 |
2-5/8 |
3-3/8 |
1 |
90-100> |
60-70 |
10,000 |
3,000 |
| 16-*4 |
16 |
4 |
17 |
1/2 |
2-5/8 |
3-3/8 |
1 |
90-100 |
60-70 |
10,000 |
3,000 |
| 16-*6 |
16 |
6 |
17 |
3/4 |
2-7/8 |
3-5/8 |
1 1/4 |
150-165 |
90-100 |
10,000 |
2,700 |
| 16-*8 |
16 |
8 |
17 |
3/4 |
2-7/8 |
3-5/8 |
1-1/4 |
150-165 |
90-100 |
10,000 |
2,700 |
| 16-*10 |
16 |
10 |
17 |
3/4 |
2-7/8 |
3-5/8 |
1-1/2 |
250-265 |
125-140 |
10,000 |
1,700 |
| 16-*12 |
16 |
12 |
17 |
3/4 |
2-7/8 |
3-5/8 |
1-1/2 |
250-265 |
125-140 |
10,000 |
1,700 |
| 14-*1 |
14 |
1 |
24 |
1/8 |
1-15/32 |
1-27/32 |
9/16 |
25-30 |
12-15 |
10,000 |
800 |
| 14-*2 |
14 |
2 |
24 |
1/2 |
2-5/8 |
3-3/8 |
1 |
90-100 |
60-70 |
10,000 |
1,500 |
| 14-*3 |
14 |
3 |
24 |
1/2 |
2-7/8 |
3-5/8 |
1-1/4 |
150-165 |
90-100 |
10,000 |
2,000 |
| 14-*4 |
14 |
4 |
24 |
1/2 |
2-7/8 |
3-5/8 |
1-1/4 |
150-165 |
90-100 |
10,000 |
1,600 |
| 14-*6 |
14 |
6 |
24 |
3/4 |
2-7/8 |
3-5/8 |
1-1/4 |
150-165 |
90-100 |
10,000 |
1,600 |
| 14-*8 |
14 |
8 |
24 |
3/4 |
2-7/8 |
3-5/8 |
1-1/4 |
150-165 |
90-100 |
10,000 |
1,600 |
| 14-*10 |
14 |
10 |
24 |
3/4 |
2-7/8 |
3-5/8 |
1-1/2 |
250-265 |
125-140 |
10,000 |
1,400 |
| 14-*12 |
14 |
12 |
24 |
3/4 |
2-7/8 |
3-5/8 |
1-1/2 |
250-265 |
125-140 |
10,000 |
1,400 |
| 12-*2 |
12 |
2 |
30 |
3/4 |
2-7/8 |
3-5/8 |
1-1/4 |
150-165 |
90-100 |
8,800 |
1,200 |
| 12-*3 |
12 |
3 |
30 |
3/4 |
2-7/8 |
3-5/8 |
1-1/4 |
150-165 |
90-100 |
8,800 |
1,200 |
| 12-*4 |
12 |
4 |
30 |
3/4 |
2-7/8 |
3-5/8 |
1-1/4 |
150-165 |
90-100 |
8,800 |
1,200 |
| 12-*6 |
12 |
6 |
30 |
3/4 |
2-7/8 |
3-5/8 |
1-1/4 |
150-165 |
90-100 |
8,800 |
1,200 |
| 10-*2 |
10 |
2 |
40 |
3/4 |
2-7/8 |
3-5/8 |
1-1/4 |
150-165 |
80-90 |
8,000 |
1,200 |
| 10-*3 |
10 |
3 |
40 |
3/4 |
2-7/8 |
3-5/8 |
1-1/4 |
150-165 |
80-90 |
8,000 |
1,200 |
| 10-*4 |
10 |
4 |
40 |
3/4 |
2-7/8 |
3-5/8 |
1-1/4 |
150-165 |
80-90 |
8,000 |
1,200 |
| 8-*2 |
8 |
2 |
55 |
3/4 |
2-7/8 |
3-5/8 |
1-1/4 |
150-165 |
75-85 |
8,000 |
800 |
| 8-*3 |
8 |
3 |
55 |
3/4 |
2-7/8 |
3-5/8 |
1-1/2 |
250-265 |
125-140 |
8,000 |
800 |
|
|
| |
|
 |
|
 |
|
 |
 |
| |
Type A has mounting
thread only |
|
Type B has cap end threaded |
|
| |
| |
|
|
|
| |
| |
 General Specifications |
|
|
|
|
| |
 |
| |
Related urls: |
|
|
- Fiber Optic Asemblies
- Fiber Optic Sensors
- Pressure and Vacuum Sealing Assemblies
|
- Temperature Sensors, Transmitters and Sealing Assembliesand Assemblies
- Temperature Transmitters
|
| |
|
| |
|
|
|
|
.jpg){kind=small}
