|
|
.jpg) |
|
|
|
| |
|
| |
| |
 |
|
| |
| |
|
|
|
| |
- NO EPOXY - NO POTTING
- HD18 - 0.187" Diameter 12 Conductor Wire Feedthrough Assembly
- HD25 - 0.250" Diameter 24 Conductor Wire Feedthrough Assembly
- HD31 - 0.312" Diameter 40 Conductor Wire Feedthrough Assembly
- HD37 - 0.375 Diameter 60 Conductor Wire Feedthrough Assembly
- Sheath Material: 300 Series SST, 4-1/2" nominal length
- Temperature Range From -112°F to +250°F
- (-80°C to +120°C)
- Vacuum Rating: 5 x 10-6mmHg @68°F (20°C)
- Leak Rate: 1 x 10-9 scc/sec He @68°F (20°C),
- 1 atm supplied
- Voltage Rating: 100 VDC
- Amperage Ratings: 500mA
- Feedthrough Pressure Rating @68°F (20°C):
- 5,000 psi (345 bar)
- Sealing gland pressure ratings, see related gland: PG, MK, MHM
NOTES:
- For 2 to 12 wires in single gland, see TG with 24 AWG
- Other wire type combinations are available. Consult factory.
- ®Chromel-Alumel is a registered trade name of Hoskins Manufacturing.
- ®Teflon is a registered trademark of E.I. Du Pont de Nemours.
|
|
|
| |
| |
|
|
| |
| |
This assembly consists of a stainless steel tubing swaged over bundled 24 AWG, solid, Teflon® coated thermocouple grade wires and/or copper wires. The feedthrough is furnished with 24 inches of leadwire on each end. Longer wire lengths can be furnished as required. |
|
 |
|
| |
| |
|
|
| |
| |
|
|
|
|
| |
 |
| |
Related urls: |
|
|
- Fiber Optic Asemblies
- Fiber Optic Sensors
- Pressure and Vacuum Sealing Assemblies
|
- Temperature Sensors, Transmitters and Sealing Assembliesand Assemblies
- Temperature Transmitters
|
| |
|
| |
|
|
|
|
Downloads:
.jpg){kind=small}
