|
.jpg) |
|
| |
|
|
| |
|
| |
| |
 |
|
| |
| |
|
|
|
| |
- Stainless Steel Fitting
- For Bearing Oil Sealing
- Easy Installation - No "Potting"
- Seals 2 to 14 Wires
- Pressure*: to 50 PSI (3.4 bar)
- Temperature Range: Ambient to 100°F (37.8°C)
- Field Adjustable
- Reusable Fitting
|
|
| |
| |
|
|
| |
 |
| |
| |
Continuous Wire Feedthrough for Embedded Bearing Temperature Sensors, Transmitters and Sealing Assemblieswhile sealing securely to prevent oil wicking along the leads.
Conax Buffalo BEARING SENSOR WIRE SEAL efficiently seals directly on the individual Teflon® insulated leads of an embedded bearing temperature sensor exiting an oil-filled bearing housing.
Typical applications include the sealing of these leads on large motors, generators, turbines, pumps, compressors and journal bearing pedestals. |
|
| |
| |
|
|
|
| |
| |
Catalog Number |
# of wires |
Thread NPT |
Length |
Hex Size |
Diameter Over Insulation |
Torque (ft-lbs) Viton |
Press.
@ 68°F Viton |
A |
B |
| BSWS4-20-* |
2-8 |
1/2" |
2-1/2" |
3-1/4" |
1" |
.044-.059 |
3-5 |
50 |
| BSWS4-22-* |
2-8 |
1/2" |
2-1/2" |
3-1/4" |
1" |
.037-.051 |
3-5 |
50 |
| BSWS4-24-* |
2-8 |
1/2" |
2-1/2" |
3-1/4" |
1" |
.032-.045 |
3-5 |
50 |
| BSWS4-26-* |
2-8 |
1/2" |
2-1/2" |
3-1/4" |
1" |
.028-.041 |
3-5 |
50 |
| BSWS5-20-* |
2-14 |
3/4" |
2-7/8" |
3-5/8" |
1-1/2" |
.044-.059 |
12-18 |
50 |
| BSWS5-22-* |
2-14 |
3/4" |
2-7/8" |
3-5/8" |
1-1/2" |
.037-.051 |
12-18 |
50 |
| BSWS5-24-* |
2-14 |
3/4" |
2-7/8" |
3-5/8" |
1-1/2" |
.032-.045 |
12-18 |
50 |
| BSWS5-26-* |
2-14 |
3/4" |
2-7/8" |
3-5/8" |
1-1/2" |
.028-.041 |
12-18 |
50 |
| BSWS5-125-* |
2-4 |
3/4" |
2-7/8" |
3-5/8" |
1-1/2" |
.123-.127 |
75-85 |
50 |
| |
 |
 |
|
| |
 |
 |
| Type A has mounting thread only |
|
Type B has cap end threaded |
|
|
|
| |
| |
- Other size NPT, MS 33656 Style E mounting thread, bore sizes and sealing gland materials of construction are available. Consult factory.
- Pressure rating guide values are for glands with elements restrained by the compressed sealant. Higher pressures may be attained by additional element restraints. Consult factory.
- All pressure and torque ratings determined at 68°F.
- *Specify Type "A" or "B".
|
|
| |
| |
|
|
|
| |
| |
 General Specifications |
|
|
|
|
 |
| |
Related urls: |
|
|
- Fiber Optic Asemblies
- Fiber Optic Sensors
- Pressure and Vacuum Sealing Assemblies
|
- Temperature Sensors, Transmitters and Sealing Assembliesand Assemblies
- Temperature Transmitters
|
| |
|
| |
|
|
|
|
.jpg){kind=small}
