|
|
|
| |
|
| |
| |
|
|
|
| |
- Resettable and non-resettable models available
- Counting range to 99999.99
- Available in 52 x 52 mm or 48 x 48 mm
- Standard AC voltage 115VAC to 230 VAC
- Non-standard voltages from 12, 24, 36 to 48 and 380 VAC
- Standard DC voltage 2-30 VDC, 10-80 VDC and 80-220 VDC
|
|
|
| |
| |
|
|
|
| |
|
|
Bauser manufactures high quality elapsed time meters and totalizers. Elapsed time meters are available with resettable or non resettable zero. The resettable series can be manually orelectronically reset, ideal for short and repetitive processes.
The world-wide known BAUSER hour counters can be fast and easily mounted.
As the counters are available in all current front dimensions, you do not require
additional bezels.
New hour counters – now with large digits and DIN dimensions 48 x 24 mm
type range 250...
type 250, 250.1, 250.2, 260, 260.1, 260.2
type 251, 251.1, 251.2, 261, 261.1, 261.2
These are 7 digit BAUSER hour counters with the smallest dimensions for AC and DC
operation. They are even suited for heavy applications on utilitly vehicles. Even for
this range a protection class of IP65 (front) is offered.
A BAUSER top program, where everything is correct. From the technical solution,
through the design up to the usual good value for money. |
|
|
| |
| |
|
|
|
|
| |
| |
(52 x 52 mm)
AC |
(52 x 52 mm)
DC |
|
36 x 24 mm)
DC |
36 x 24 mm)
DC |
631 -G,TA
632 -BTA
633 -G,T
634 -BT
631.1 -GPA
632.1 -BPA
633.1 -GP
634.1 -BP |
629 -GTA
630 -BTA
637 -GT
638 -BT
629.1 -GPA
630.1 -BPA
637.1 -GP
638.1 -BP |
AC -BT
250.1 -B-T1
250.2 -B-T 2
251 -GT
251.1 -G-T1
251.2 -G-T2 |
260 -BT
260.1 -B-T1
260.2 -B-T2
261 -GT
261.1 -G-T2
261.2 -G-T 3 |
(48 x 48 mm)
AC |
(48 x 48 mm)
DC |
48 x 24 mm)
DC |
48 x 24 mm)
DC |
631.2 -G TA
632.2 -BTA
633.2 -GT
634.2 -BT
631.3 -GPA
632.3 -BPA
633.3 -GP
634.3 -BP |
629.2 -GTA
630.2 -BTA
637.2 -GT
638.2 -BT
629.3 -GPA
630.3 -BP A
637.3 -GP
638.3 -BP |
252 -BT
252.1 -B-T1
252.2 -B-T2
253 -GT
253.1 -G-T1
253.2 -G-T2 |
262 -BT
262.1 -B-T1
262.2 -B-T2
263 -GT
263.1 -G-T1
263.2 -G-T2 |
B=Black
G=Grey
T=Terminal connection
T1=-plug connection Bent 90° ,
T2= terminal connection Bent 90°
P=Plug Connection
A=Protection against accidental contact |
|
|
| |
| |
|
|
| |
|
| |
|
| Display |
AC |
DC |
| Counting Range : |
.99999,99 h |
99999,99 h |
| |
|
|
| Digits:: |
1,5 x 3,5 mm (with lens 4 mm),
white on black, decimals
black on white |
1,5 x 3,5 mm (with lens 4 mm),
white on black, decimals
black on white |
| standard voltages: |
115 or 230 V AC |
10 - 80 V DC (1,5 - 15 mA) |
| Voltage tolerance: |
± 10 % |
---------- |
| Frequency : |
50 or 60 Hz
(on request 50 and 60 Hz) |
---------- |
| Current consumption: |
approx. 10 mA at rated voltage |
|
| Protection Class: |
DIN 40050, housing IP 65 (front)
terminals: IP 20 (Variant VBG 4)
IP 00 (without VBG 4) |
DIN 40050, housing IP 65 (front)
terminals: IP 20 (Variant VBG 4)
IP 00 (without VBG 4) |
| |
|
|
| Testing voltage: |
winding and contact against GND
2500 V/50 Hz |
---------- |
| Ambient
temperature: |
- 20°C to + 70 °C |
- 20°C to + 70 °C |
| Fixing: |
via included retaining clip*,
panel thickness up to 10 mm,
or via integrated snap-in lugs,
panel thickness up to 2 mm,
whereas the cutout should be
452,+0,3,3 x 45,2+0,3 |
| Connection: |
terminals or plugs, with or without
protection against accidental contact |
| Approval: |
(UL, CSA and VDE at additional cost) |
---------- |
| Weight: |
approx. 46 g |
|
|
| |
| |
|
|
|
|
| |
| |
 General Specifcations |
|
|
.jpg){kind=small}
.jpg){kind=small}
