AEMC^®Instruments

There are two clamp positions. Direct reading in X1 mode and user is able to avoid splitting lines which provide for Enables user of a clamp meter to measure AC current on a 2-wire or 3-wire power cord to 15A. When user plugs the power connector (2-prong or 3-prong) into the line separator, the hot/live conductor is separated from the neutral (and ground). User then simply clamps onto the Line Separator for an easy and safe measurement of current without the need to cut off the plug and separate the conductors. Two clamp positions: x1 for direct readings; x10 for actual reading multiplied by 10. Also features voltage check function.