|
.jpg) |
|
AEMC®Instruments
Provides the electrical field with quick reference testers
such as circuit breaker identifiers, motor phase and rotation testers, AC line splitters that increase the sensitivity of current probes, qvoltage probes and outlet testers |
| |
 |
|
 |
| |
Circuit Breaker Identifiers
The Model CBI-1 makes it extremely easy and fast to find the circuit breaker or fuse that supplies a specific power receptacle or switch.
Model CBI-1 [Catalog No. 2115.49]
Phase / Motor Rotation Testers
The AEMC® Phase & Motor Rotation Tester provides three functions in one unit: open phase indication, 3-phase sequence indication and motor rotation indication. Input voltage range is 100V to 600VAC. Frequency range is 45 to 70Hz. The unit is battery operated (9V) and meets EN 61010 safety requirements.
Model PMR-1 [Catalog No. 2121.04]
Model PR-1 [Catalog No. 2121.06]
AC Line Splitters
The AC Line Splitter Model ALS-1 increases the sensitivity of clamp-on current probes and clamp-on meters. Avoiding splitting lines makes reading current easy. Simply plug the ALS-1 into a connector for a
safe measurement. Direct readings are available.
Model ALS-1 [Catalog No. 2121.05]
Voltage Testers
The Voltage Tester is an ideal tool for checking wiring connections as well as grounding. It performs AC voltage tests up to 600VAC and DC voltage tests to 250VDC. The battery provides up to 5 hours of continuous operation.
Model SC-1 [Catalog No. 2121.01]
Outlet Testers
The Outlet Tester detects faulty wire in 3-wire receptacles. It detects open ground and neutrals as well as reversed hot/ground connections. Ideal for use on 100 to 125VAC receptacles.
Model OT-1 [Catalog No. 2121.02]
Outlet / GFCI Testers
The Outlet/GFCI tester examines GFCI for proper operation. It detects faulty wiring in 120V 3-wire receptacles. It detects open grounds and neutrals as well as reversed hot-ground connections. Ideal for use on 100 to 125VAC receptacles.
Model OT-2 [Catalog No. 2121.03]
|
|
|
|
 |
| |
|
|
|
